KAJ-II PC video related interference device product function
1 the interference signal is generated by the computer video information, which has excellent dynamic frequency tracking capability;
2 interference signal multi frame to maintain and static coverage characteristics, time domain correlation;
3 in the video signal gap has taken a unique filling measures to achieve no interference;
4 products on the video information without the two forwarding and strengthen the role of;
5 effectively filter out the power of the conduction radiation;
6 built-in antenna, easy to install.

KAJ-II computer video correlation jamming control target parameter
1, interference mode: video correlation
2, interference frequency band: 10KHz-1.3GHz
3, interference direction: omnidirectional
4, interference intensity: less than 90dB V (230MHz) less than 97dB V (1000MHz)
5, conduction emission suppression: greater than 35dB (10KHz-30MHz)
6, continuous working time: more than 24 hours
7, power consumption: less than 5W
8, working voltage: AC190-250V, 50Hz
9, working temperature: -10 -----+45
10, working temperature: less than 85%

Installation method and notice of KAJ-II computer video related interference device
Installation method
1, shut down the computer and the monitor power, to display the video signal power from the computer display, received the video adapter;
2, the video adapter cable of the other two interfaces are connected to the computer graphics card and video input port;
3, unplug the PC host power line, with the random 1.5m power supply line through the interference power supply output port for the main engine;
4, the 1.5m power cord is connected to the power input port, the other end is inserted into the AC220 power outlet;
5, the interference device placed on the computer desk;
6, check the above steps, determine the interface is strong, the connection is correct.

Note
1. The video display information of a computer is protected only by a computer;
2, the computer must pass through the power supply side can filter out the power supply of the conduction radiation;
3, open the power supply of the device, such as "power" indicator is not bright, please check the connection of the power cord;
4, the normal working condition of the computer, such as the "status" of the interference device is not bright, indicating that the relevant interference function is abnormal, please check the video adapter connection is strong;
5, after the computer is shut down, please close the interference device in time, to prolong the service life of the interfering device;
6, equipment failure, please contact me.